Resistor Guides
Step-by-step explanations of the calculations behind the tools: color codes, voltage drop, current, power ratings and more.
-
Choosing Pull-Up Resistor Values
Why digital inputs need pull-up and pull-down resistors, how to pick the value, and typical values for buttons, I2C and open-drain outputs.
-
Resistors in Series and Parallel Explained
How resistors behave in series and in parallel, the formulas for each, and how to simplify circuits that mix both.
-
Resistor Power Ratings Explained
What a resistor’s wattage rating means, how to calculate the power it dissipates, and how much safety margin to leave.
-
How to Calculate Current Through a Resistor
Find the current through any resistor with Ohm’s law, in single, series and parallel circuits, plus how to measure it safely.
-
How to Calculate Voltage Drop Across a Resistor
Use Ohm’s law to find the voltage across any resistor, in series and parallel circuits, with worked examples and a quick way to check your answer.
-
How to Read Resistor Color Codes
A step-by-step guide to reading 4, 5 and 6-band resistors: which end to start from, what each band means and how to avoid common mistakes.